Xtreme Innovation Corp installs, replaces and repairs seamless gutters and downspouts on Rhode Island homes and commercial buildings. Sagging runs, split seams, overflow and foundation drainage are handled by the same crew.
Gutters are the cheapest part of the exterior and the one that causes the most expensive damage. Water that overflows a clogged run soaks the fascia, runs down the siding and collects at the foundation. The gutter fails first, the wall pays for it.
New gutter installation on homes without a system, or on additions and new construction. Hanger spacing, pitch and outlet placement are calculated before anything is hung. A gutter that does not drain is worse than having no gutter at all.
Gutter replacement when hangers pull loose, seams split or the fascia behind them has softened. Old sections come down, damaged fascia board is repaired, and the new run is pitched correctly. Removal, cleanup and disposal are included in the price.
Gutter repair on leaking seams, sagging runs, loose hangers and separated corners. Resealing and rehanging a sound aluminum run costs a fraction of a full replacement. Repair works when the metal is still intact and only the connections have failed.
Seamless gutters are formed on site from a single coil, so the only joints are at corners and outlets. Fewer seams means fewer leak points over a Rhode Island winter. Color options are matched to the existing trim and fascia.
Downspout installation moves collected water away from the foundation instead of dropping it at the corner. Placement depends on grade, landscaping and where water already pools in the yard. Extensions and splash blocks carry the discharge past the footing line.
Downspout replacement when sections crush, separate at the elbows or ice splits the seam open. Undersized downspouts are the usual reason a gutter overflows even after cleaning. Sizing is checked against total roof area before the new pipe goes up.
Gutter maintenance clears leaves, shingle granules and nesting debris from the run and outlets. Standing water in a gutter freezes, expands and pulls hangers out of the fascia. Two visits a year, spring and fall, handle most Rhode Island properties.
Seamless runs are rolled to length at the house, so no single seam sits in the middle.
The same company that installs the roof sets the gutters, so the drip edge detail actually matches.
The gutter estimate arrives in writing, with linear footage, downspout count and color all listed out separately.
We check the fascia, the roof edge and where water currently lands on the ground.
Linear footage, corners, downspout locations and color are measured and quoted during that same visit.
Coil is rolled to length at the house, hung to pitch, and sealed at the corners.
We run water through the system, confirm the drainage line, and clear the whole work area.
Completed gutter and downspout projects in Rhode Island. Select any photo to view it full size.
Gutter installation and replacement is available in seven Rhode Island communities. Select your town for details on gutter work in that area.
Send the address and a photo of the current gutter line. The written estimate follows an on site measurement, at no cost.
Call NowAlso available in Rhode Island: Roofing Installation & Repair, Siding Installation & Repair.